Bluetooth Adapter Parani SD1000 is used on a bobtail that uses a LCRII or LCRiQ register.
The LCR register board default baud rate is 19200.
Parani SD1000 User Guide PDF file below.
Parani Bluetooth Adapter part number SD1000-01 (Module, Accessories & Power Adapter) approx. price $160.
Source (optional): Westward Sales
- Operating Voltage: The standard input voltage range is 5 to 12 VDC.
- Power Indicator: Under normal conditions (5V+), the Power LED displays a solid green color to indicate power is properly supplied.
Summary of Diagnostic LEDs (at proper voltage):
- Mode LED: Blinks green (different patterns) to show pairing or standby status.
- Connect LED: Blinks every 1 second when a Bluetooth connection is active.
- RS232-RX/TX: Indicates data transfer activity.
Bluetooth serial adapter uses four DIP switches to configure hardware settings. Switches 1, 2, and 3 control the Baud Rate, while Switch 4 controls Hardware Flow Control.
DIP Switch Settings
| Baud Rate (bps) | Switch 1 | Switch 2 | Switch 3 |
|---|---|---|---|
| 9600 (Default) | OFF | OFF | OFF |
| 2400 | ON | OFF | OFF |
| 4800 | OFF | ON | OFF |
| 19200 | OFF | ON | ON |
| 38400 | OFF | OFF | ON |
| 57600 | ON | OFF | ON |
| 115200 | OFF | ON | ON |
| 230400 | ON | ON | ON |
Hardware Flow Control (Switch 4)
- OFF: Disable hardware flow control.